BestAirPro SG413-PR | Our#: 177146
Replacement for Aprilaire 413 Filter
BestAirPro SG413-PR | Our#: 177146
- Fast Shipping & Free Returns
- 100% Compatibility Guarantee
Protect more sensitive lungs
- Highest rated filter to reduce most pollutants
- Reduces pollen, dust, lint, dust mite debris, pet dander & mold spores
- Lessens odors from car fumes & smoke
- Removes bacteria & virus carriers
- Creates cleaner indoor air
![Replacement for Aprilaire 413 Filter](https://www.discountfilters.com/images/products/SG413-PR_10w.jpg)
- Fast Shipping & Free Returns
- 100% Compatibility Guarantee
Frequently Purchased Together
Product Details
Replacement for Aprilaire 413 Filter - 2-Pack
Features:
- Budget alternative to factory original product
- Built to same dimensions and specifications as the original Aprilaire product
- Easy slide-in filter replacement
- Traps and removes 75% of virus-sized particles (.3 to 1 micron) and over 90% of dust-sized particles (3.0 to 10.0 microns).
- Traps and permanently removes over 90% of pollen, mold and spore sized particles (3.0 to 10.0 microns).
- Collapsible media with self spacing pleats installs in seconds.
- Media replacement is recommended after one year depending on fan hours
- Rated MERV 13
- Note: This product is not manufactured or distributed by Research Products Corporation, owner of the registered trademark Aprilaire®.
- NOTE: Not suitable for upflow or downflow configurations when filter is installed in horizontal orientation.
Fits the following Aprilaire Air Cleaners:
- Model 2400 after upgrading with #1413 Media Upgrade Kit
- Model 2140 after upgrading with #1413 Media Upgrade Kit
- Model 1410
- Model 2410
- Model 3410 (new premium model with electronic control)
- Model 4400 (old premium model with electronic control)
Instructions:
1). Turn of HVAC system
2). Remove Air Cleaner door
3). Remove dirty filter
4). Expand clean filter
5). Install new (clean) filter with Air Flow arrow pointing toward furnace or air handler. Align filter top and bottom rails and slide into place. Replace door.
How to change your furnace/air-conditioner/HVAC air filter
Estimated time: 10 minutes or less
Steps
Determine the location of your filter
Your forced air system will be similar, whether or not it is a heating (furnace) or cooling (AC) system – or both. The furnace filter housing/slot is located right next to the heating/cooling system’s air handler or blower. Your filter(s) may also be located in a return grille on the wall or ceiling of your home.
Determine the type/size of filter that you use
Typically, the dimensions or part number of the filter will be printed on the filter frame. Use this information to order a new filter.
Purchase a new air filter from DiscountFilters.com
Visit DiscountFilters.com and purchase a new filter. Use our filter finders to verify the correct match.
Remove the old filter
Turn off the power to the heating/cooling system and remove the old filter from its housing/slot and discard.
Insert the new filter
Pay attention to any airflow direction arrows printed on the frame of the new filter. Install the filter by sliding it into the filter housing/slot with the airflow arrow pointing towards the blower. If installing the filter in a wall or ceiling grille – the airflow arrow should point towards the wall or ceiling. Turn on the power to the forced air system.
Enjoy cleaner air!