The factory original Whirlpool Ultimate 4396510 refrigerator filter will remove pollutants that can be found in your water supply. This includes unappetizing lead, mercury, and dirt that could be in your drinking water. This filter has certain specifications which make it an excellent choice for you. The Whirlpool 4396510 has a 400 gallon filtering capacity flows at a rate of .5 gallons per minute. It also has an operating temperature of 33-100 F and pressure range of 30-120. What really sets this filter apart is the NSF/ANSI ratings of 42 and 53. This rating means that the filter was tested against NSF/ANSI international standards for reducing certain contaminants such as chlorine taste and odor. The Whirlpool 4396510 water filter is easily installed in compatible refrigerators and should be changed once every six month period to assure that your home is receiving the best water and ice quality.
Replacement Refrigerator Filters for SGF-W01
Product Description
The Whirlpool 4396510 Refrigerator Filter is the OEM factory original replacement for compatible refrigeration systems. It is typically used in side-by-side model refrigerators by Whirlpool, Amana, Thermador, KitchenAid, and more. What makes the Whirlpool replacement special is that it's an original OEM product with factory original parts. Along with being an OEM filter, the Whirlpool 4396510 is certified to meet NSF/ANSI standards 42 and 53. This means that the filter was tested to check for the reduction of contaminants such as chlorine, mercury, chemicals, and other impurities. This whirlpool filter is designed to reduce contaminants while retaining beneficial fluoride. The filter is easily installed and will provide your home with noticeably improved water quality and taste if replaced at least once every six months.
Installation
How To Install The 4396510 Filter:
- Turn off icemaker
- Remove old filter by rotating cap about 1/4 turn clockwise
- Pull the old filter cartridge out
- Remove the cartridge grille cap by sliding it off the end of the old cartridge
- Slide the cartridge grille cap onto the new cartridge
- With the new cartridge cap in the vertical position, insert the new filter cartridge into the base grille
- Rotate the cap clockwise to a horizontal position
- Flush three gallons of water through the filter cartridge before use
- Turn on the icemaker
Cross-Compatibility
The filters below are 100% compatible with part number 4396510
Product Comparison
Marvel at the specifications of our 4396510 compatible filters.
6 Months
300 Gallons
Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates
NSF/ANSI 42
0.5 GPM
25-80 PSI
33-100 °F
6 Months
240 Gallons
Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates
NSF/ANSI 42, 53
.78 GPM
30-120 PSI
33-100 °F
The DiscountFilters.com Difference
- Free Shipping on Qualifying Orders (Same Day)
- Free Returns For 1 Year
- 100% Compatibility Guarantee
- Made With Care in Indiana USA