Replacement Refrigerator Filters for XWFE

  • Best Value
GE Replacement for XWFE Filters
GE XWFE
$80.95 / filter
3 Pack Selected
  • Change every 6 Months
  • Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates
  • NSF/ANSI 42, 53
  • Compare More
Learn More

Product Description

The GE XWFE filter compatible with select GE side-by-side and bottom-freezer refrigerators. The XWFE water filter cartridge holder is located in the back upper-right corner of the fresh food refrigerator compartment or in the left door. It is certified to reduce chlorine-resistant cysts, lead, select pharmaceuticals and 50 other impurities. This premium filter reduces select pharmaceuticals, including ibuprofen, progesterone, atenolol, trimethoprim & fluoxetine - as well as 99% of Perfluorooctanoic acid (PFOA) and Perfluorooctaine Sulfonate (PFOS).

The XWFE is tested NSF/ANSI Standards 42, 53, and 401 for the reduction of the substances listed on the performance data sheet.

Installation

INSTALLING THE FILTER IN A BOTTOM FREEZER REFRIGERATOR

1. Open the filter cartridge housing by squeezing the 2 front tabs and gently pulling down.
2. Line up the ports on the filter with the ports on the filter cartridge holder, and gently insert the filter.
3. Slowly turn the filter to the right until it stops. DO NOT OVERTIGHTEN. As you turn the filter, it will automatically
adjust itself into position. The filter will move about a ¼ turn or 90 degrees, until the arrow on the filter aligns with the arrow on the filter cartridge holder.
4. Slowly push the filter up into the clips. 
5. Close the filter cartridge housing by gently pushing the lid upwards until the tabs lock into place.
6. Continue following instructions shown in Purging the Filter and Reset Filter Change Indicator Sections.

INSTALLING THE FILTER IN A SIDE BY SIDE REFRIGERATOR

1. Line up the arrow on the filter with the arrow on the filter cartridge holder. Gently push the top of the new filter up inside the holder.
2. Slowly turn the filter to the right until it stops. DO NOT OVERTIGHTEN. As you turn the filter, it will automatically raise itself into position. The filter will move about a ¼ turn or 90 degrees.
3. Continue following instructions shown in Purging the Filter and Reset Filter Change Indicator Sections.

INSTALLING THE FILTER IN A MULTI-DOOR BOTTOM FREEZER REFRIGERATOR

1. Open the filter cartridge housing by pulling the door open.
2. Line up the ports on the filter with the ports on the filter cartridge holder, and gently insert the filter.
3. Slowly turn the filter to the right until it stops. DO NOT OVERTIGHTEN. As you turn the filter, it will automatically adjust itself into position. The filter will move about a ¼ turn or 90 degrees, until the filter cannot be turned, and the label faces outward.
4. Slowly push the filter up into the clips.
5. Close the filter cartridge housing by gently pushing the door closed until the tabs lock into place.
6. Continue following instructions shown in Purging the Filter and Reset Filter Change Indicator Sections.

Cross-Compatibility

The filters below are 100% compatible with part number XWFE
1 compatible alternative filter models below.
XWFE

Product Comparison

Marvel at the specifications of our XWFE compatible filter.

GE XWFE
6 Months
170 Gallons
Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates
NSF/ANSI 42, 53
0.5 GPM
25-80 PSI
33-100 °F

The DiscountFilters.com Difference

  • Free Shipping on Qualifying Orders (Same Day)
  • Free Returns For 1 Year
  • 100% Compatibility Guarantee
  • Made With Care in Indiana USA