Rainsoft® Ultrefiner UF50 Compatible RO Filter Set

Rainsoft®  Ultrefiner UF50 Compatible RO Filter Set

NOTE: This filter set is for Ultrefiner systems manufactured before 2013. It is not for use with the Ultrefiner II systems manufactured in 2013 and after

Kit includes 2 ClearChoice CCS044 10 Micron Carbon Filters and 1 Neo-Pure RS9-TFM-50 Reverse Osmosis Membrane 

For use in RainSoft Ultrefiner UF50 50 GPD RO System

The Neo-Pure RS9-TFM-50 Reverse Osmosis Membrane replaces part number TFC-RS9-50 and it made specifically for Rainsoft® reverse osmosis drinking water systems.  It fits several Rainsoft® systems including system models UF50T-CBVOC and UF50N-CBVOC.  Approximate dimensions - 9-3/4" Long X 1.5" Diameter.  Capacity - 50 Gallons Per Day.  Made in the USA.

Routine System Maintenance

If the incoming water to your Ultrefiner system is very poor (for example: high hardness, high dissolved solids, high iron), you can help maintain the system's operation by periodically performing this flushing procedure:

Drain Your Storage Tank

Open the Ultrefiner faucet and let the water run until the flow turns into small drips. Close the Ultrefiner faucet. The Drain flow will continue to run until your tank has been refilled.

Flush the Membrane And Drain Line

While refilling your storage tank, turn the Drain Dial to the F position. (See Figure 12 on Page 11.) This will increase the volume of drain water flushing through the membrane. Once your tank has refilled (typically 2 -3 hours), the Drain flow will shut off. You should then turn the Drain Dial back to its previous setting.

Rainsoft® is a registered trademark of AWTP, LLC Elk Grove Villiage, IL .  Company names are registered trademarks of their respective holders. National Trade Supply, Inc and DiscountFilters.com are not affiliated with AWTP, LLC or Rainsoft®.