ClearChoice CCB013-SYS | Our#: 198295

ClearChoice Undercounter Drinking Water System

ClearChoice CCB013-SYS | Our#: 198295

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee
  •  NSF/ANSI 42 & 53
  • A powerful water purification system at a great price
  • Your ideal solution to have clean filtered drinking water on tap
  • Reduces scale build-up and improves taste
  • DIY Installation
  • Easy to set up
  • Faucet not included
  • Made in the USA

4 people in your area recently purchased this product!

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee
  •  NSF/ANSI 42 & 53
Frequently Purchased Together
Frequently Purchased Together

Product Details

ClearChoice Undercounter Drinking Water System. 

The ClearChoice CCB013-SYS drinking water systems provides superior filtration and removes lead, cysts, chlorine taste and odor, scale build-up and sediment. The system includes a high quality filter head with 1/4" push-in "quick connect" fittings for easy setup. Use the supplied stainless steel bracket and screws to mount the head under your sink or wherever filtered drinking water is needed.  You supply a drinking water faucet that matches your decor (faucet not included with system). 

FEATURES:

  • Includes CCB013 filter cartridge, filter head, metal bracket with mounting screws
  • Approximately 18" is required from the floor to the top of the mounting bracket.  This provides the needed clearance to remove/replace the filter cartridge
  • Easy, no mess twist installation
  • Great alternative to expensive, complicated, and hard-to-maintain reverse osmosis (RO) systems
  • Reduces lead better than the federal action level of 15 ppb
  • Reduces particles as small as 1 micron and possible health contaminants such as cryptosporidium and giardia cysts
  • Built-in polyphosphate scale inhibitor reduces scale build-up on faucets and surfaces that water touches
  • Reduces volatile organic compounds including trihelomethane.
  • Made in USA

INSTRUCTIONS FOR USE:

  • Turn off cold water supply
  • Attach metal mounting bracket to head using supplied screws
  • Attach entire head assembly to wall under your sink/counter using supplied screws - making sure it is level and at least 18" from the ground to the top of the bracket
  • Using plumbing connection of your choice - connect a 1/4" water line to your cold water supply. We recommend an angle stop or similar shut off valve to isolate the system if needed. Recommended angle stop adapter is the John Guest ASVPP1LF or similar, available at most home improvement stores, Amazon, and plumbing supply houses.
  • Connect the incoming 1/4" water line to the inbound port on the head (note direction of arrow on the head) by simply pushing the line into the fitting on the head
  • Connect a 1/4" water line to the outbound port on the head by simply pushing the line into the fitting on the head
  • Connect the other end of the outbound water line to a drinking water faucet of your choice
  • Turn on cold water supply
  • Open drinking water faucet and let 2-3 gallons of water flush through the faucet, or until the water runs completely clear. You may see the water initially come out as milky or opaque. This is normal and not harmful
  • NOTE: Faucet, water line, and plumbing connections are not included with this kit.  Cold water use only.
  •  


    Specifications

    Capacity:
    1,500 Gallons
    Certifications:
    NSF/ANSI 42 & 53
    Filter Dimensions:
    13-1/2" Length x 3" Diameter
    Max Pressure:
    125 PSI
    Max Temperature:
    100 F
    Micron Rating:
    1 Micron
    Reduction Claims:
    Lead, Cysts, Scale, Chlorine Taste & Odor, Sediment